Connecting A Dvd Player Or Cable Box / Satellite Receiver (Set-Top Box) Via Component Cables; Connecting A Camcorder - Samsung PN50A510P3F Quick Setup Manual

Connecting a DVD Player or Cable Box /
Satellite receiver (Set-Top Box) via Component cables
Connecting to Y, P
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
2

➢ Component video separates the video into Y (Luminance (brightness)), P
sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN 1,
connect the audio cable to COMPONENT IN 1 also.
➢ Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
➢
When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the
cable.

Connecting a Camcorder

DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
2
Audio Cable (Not supplied)
Component Cable (Not supplied)

➢ Each Camcorder has a different back panel configuration.
➢ When connecting a Camcorder, match the color of the connection terminal to the cable.
, P
B R
TV Rear Panel
Audio Cable (Not supplied)
Component Cable (Not supplied)
(Blue) and P
B
TV Rear Panel
English - 4
1
Connect a Component Cable
between the COMPONENT IN (1 or
2) [Y, P , P ] jacks on the TV and
B R
the COMPONENT [Y, P
on the DVD Player or Cable Box /
Satellite receiver(Set-Top Box).
2
Connect Audio Cables between
the COMPONENT IN (1 or 2) [R-
AUDIO-L] jacks on the TV and the
AUDIO OUT jacks on the DVD
Player or Cable Box / Satellite
receiver (Set-Top Box).
3
Press the SOURCE button on the
remote control until you see the
Set-Top/Cable Box signal (see
"Viewing an External Signal Source"
on page 9).
(Red) for enhanced video quality. Be
R
1
Locate the A/V output jacks on the
camcorder.
2
Connect a Video Cable
between the AV IN [VIDEO]
jack on the TV and the VIDEO OUT
jack on the Camcorder.
3
Connect Audio Cables between the
AV IN [L-AUDIO-R] jacks on the TV
and the AUDIO OUT jacks on the
Camcorder.
4
Press the SOURCE button on the
remote control until you see the
Camcorder signal (see "Viewing an
External Signal Source" on page 9).
, P ] jacks
B R