Samsung PL-50D4H Owner's Instructions Manual page 77

Notes:
Both screen position and size will vary, depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Video Signal Resolution
(Dot X Line)
720 X 400
640 X 480
800 X 600
IBM PC / AT
Compatible
1024 X 768
1280 X 1024
• The interlace mode is not supported.
• The PDP operates abnormally if a non-standard video format is selected.
• The table above conforms to IBM/VESA regulations and is based on using the Analog Input.
• "1280 x 1024" is not available in DVI mode.
Notes:
• When this PDP is used as a PC display, 32-bit color is supported.
• Depending on the manufacturer, your PC display screen might appear different.
(and depending on your particular version of Windows.)
Check your PC instruction book for information about connecting your PC to a PDP.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4kHZ
(horizontal).
• In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power
is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote control
or SOURCE button on the front panel to enter the VIDEO mode. Also, make sure that the PC is
connected.
• Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise,
random signals might appear).
Vertical Horizontal
Frequency(Hz) Frequency(KHz)
70.087 31.469
59.940 31.469
72.809 37.861
75.000 37.5
85.008 43.269
56.250 35.156
60.317 37.897
72.188 48.077
75.000 46.875
85.061 53.674
60.004 48.363
70.069 56.476
75.029 60.023
84.997 68.677
60.020 63.981
Vertical Horizontal
Polarity Polarity
P N
N N
N N
N N
N N
N/P N/P
P P
P P
P P
P P
N N
N N
P P
P P
P P
77