Samsung PDP-TELEVISION Owner's Instructions Manual page 35

Using the Photo (JPEG) List
Zooming-In
1 After switching the mode to WISELINK, select a memory device that you
have installed. (Refer to page 29)
Press the œ or √ button to select Photo, then press the ENTER (
2
button. JPEG files and existing folders are displayed.
Press the .../†/œ/√ buttons to select a file, then press the ENTER (
3
button.
Pressing the button over a photo icon shows the currently selected photo in
full screen.
4 Press the INFO (
Zoom, Copy, Delete, Print, List).
Press the ... or † button to select Zoom, then press the ENTER (
button.
Each time the ENTER (
(X1 X2 X3
• X2: Zoom-in to the photo X2.
• X3: Zoom-in to the photo X3.
• X4: Zoom-in to the photo X4.
• X1: Restore the photo to its original size.
To move the enlarged photo image up/down/left/right, press the .../†/œ/√
buttons.
To exit WISELINK mode, press the WISELINK button on the remote control.
Zoom function information icon (Displayed at the top left of the screen).
Icon Current OSD
Zoom (x 2)
Zoom (x 3)
Zoom (x 4)
Zoom (x 1)
Button
Pan Down
Pan Up
Pan Right
Pan Left
➢
Press the WISELINK button on the remote control to turn on the WISELINK
mode.
) button to display the option (Slide Show, Rotate,
) button is pressed, the photo size increases.
X4)
Zoom-in to a photo x2.
Zoom-in to a photo x3.
Zoom-in to a photo x4.
Restore a photo to its original size.
Pan down to view the lower
part of a zoomed-in photo.
Pan up to view the upper part of a
zoomed-in photo.
Pan right to view the right side of a
zoomed-in photo.
Pan left to view the left side of a
zoomed-in photo.
)
)
Function
Function
English - 35
)
219x171
6 KBytes
May 05,2006
3/130
Move Enter
Slide Show
Rotate
Zoom
Copy
Delete
Print
List
Exit
Move Enter Return
œœ 1/10 Page √√
Photo Menu Return