Part Names; Front Panel - Onkyo A-9130 Instruction Manual

Part Names

Front Panel

 
1. Í ON/STANDBY button
2. Remote control sensor: Receives signals from the remote
controller.
0 The signal range of the remote controller is within
about 16y/5 m, at an angle of 20° on the perpendicular
axis and 30° to either side.
3. Volume controller
4. Input source indicators: The indicators light according to
the selected input source.
0 The indicator for the selected input source blinks when
MUTING ( p6) is active.
5. INPUT dial: Switches the input source to be played.
6. BASS -/+ controller: Enhance or moderate the bass range
of the speakers. ( p18)
7. TREBLE -/+ controller: Enhance or moderate the treble
range of the speakers. ( p18)
8. BALANCE L/R controller: Adjust the left/right audio
balance. ( p19)
9. DIRECT button/indicator: Switch the DIRECT feature on
and off. The indicator lights when the DIRECT feature is
on. ( p18)
10. PHASE MATCHING BASS button/indicator: Switch the
PHASE MATCHING BASS feature on and off. The
indicator lights when the PHASE MATCHING BASS
feature is on. ( p18)
11. MAIN IN button/indicator: Button for making settings
when this unit is used as a power amplifier. The indicator
lights when the mode to use this unit as a power amplifier
is on. ( p19)
12. PHONES jack: Connect stereo headphones with a
standard plug (Ø1/4"/6.3 mm diameter).
4
  

 
Before use

 
