Setting The Picture; Changing The Picture Standard; Adjusting The Custom Picture - Samsung LW15M2 Owner's Instructions Manual

SETTING THE PICTURE

Changing the Picture Standard

You can also press the
P.MODE button on the remote
control to select one of the
picture settings.

Adjusting the Custom Picture

You can select the type of picture which best corresponds to your
viewing requirements.
1. Press the MENU button to display the menu. Press the
select "Picture", then press the ENTER
2. Press the ENTER
3. Press the or
Press the ENTER
4. Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for optimum display in a normal environment.
Movie: Selects the picture for comfortable display in a dark room.
Custom: Select to view your favorite display settings.
(Refer to "Adjusting the Custom Picture" on page 11)
The Picture mode must be adjusted separately for each input source.
Your set has several settings which allow you to control picture quality.
1. Press the MENU button to display the menu. Press the
select "Picture", then press the ENTER
2. Press the or
then press the ENTER
3. Press the or
Press the ENTER
4. Press the or
particular item. Press the ENTER
5. Press the EXIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more
natural look.
If you make any changes to these settings, the picture mode is automatically switched
to "Custom".
English-11
button to select "Mode".
button to select the desired picture effect.
button.
button to select "Custom",
button.
button to select a particular item.
button.
button to decrease or increase the value of a
button.
or button to
button.
or button to
button.