Installation
Installation
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer
where you purchased the product.
Owner's Manual
D-sub 15 pin Cable
Installation Instructions
Installation Instructions
• The Monitor can be installed in various ways such as on a wall, or on a desktop etc.
• The plasma display is designed to be mounted horizontally or vertically. The speakers shown are optional.
GROUNDING
Ensure that you connect the grounding / earth wire to prevent possible
electric shock. If grounding methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not try to ground the
unit by connecting it to telephone wires, lightening rods, or gas pipes.
yyyyyy
W
all Mount Installation
W
all Mount Installation
yyyyyy
yyyyyy
yyyyyy
yyyyyy
1.5V
Alkaline Batteries
Power Cord
For proper ventilation, allow a clearance of 4" on each
side and 2" from the wall. Detailed installation instruc-
tions are available from your dealer, see the optional
Wall Mounting Bracket Installation and Setup Guide.
4 inches
BNC-RCA Adapter
4 inches
4 inches
4 inches
Introduction
Power
Supply
Short-circuit
Breaker
2 inches
Owner's Manual 9