Husqvarna 131RB Operator's Manual page 13

2. Push the start throttle button.
3. Turn the knob counterclockwise to a vertical position
to open the valve of the fuel tank.
4. Set the choke control in the choke position.
5. Hold the product to the ground. Pull out the cord
slowly with your right hand until you feel some
resistance. Pull the cord quickly and with force. Keep
doing it until you hear the engine start.
WARNING: Use the starter rope handle.
Do not twist the starter rope around your
hand.
537 - 005 - 23.05.2018
CAUTION: Do not pull all the starter rope
out. Do not let go of the starter rope
handle when the cord is fully extended.
6. Set the choke control to the run position, then pull
the start rope until the engine starts.
7. Pull the throttle trigger lightly and run at low speed
for 60 seconds.
WARNING: Do not touch the cover. The
cover can burn your skin and cause
electrical shock if the spark plug cap is
damaged. Do not use a product with
damaged spark plug cap..
To start a warm engine
1. Set the stop switch to the start position.
2. Turn the knob counterclockwise to a vertical position
to open the valve of the fuel tank.
3. Set the choke control to the run position.
4. Pull the cord quickly with force. Keep doing it until
the engine starts.
13