Operating Tips - Samsung LN2A620A1F User Manual

Operating Tips

• When the screen is switched to the TV program.
– When you select the first button, the DTV button, in the Device List, it switches to the TV program.
– Although you have selected another device from the Device List, if detecting a video signal from the device fails, the
"Connection failed" message appears and the screen automatically switches to the TV program.
– When the 1394 connection to the selected device is disconnected, the screen automatically switches to the TV
program. If you reconnect the device, the reconnected device is automatically selected.
• When connected to a AV-HDD
– When a AV-HDD disc is rotating, there may be a time delay.
• When connected to D-VHS
– Some devices support an automatic connect function (I-mode). These devices may cause a malfunction when multiple
devices are connected.
• When connected to a camcorder
– Depending on if the camcorder is in Tape(or HDD) or Camera Mode, the control panel changes.
If the camcorder turns off the power (power saving mode), the camcorder may disappear from the Device List.
• AV-HDD, D-VHS and camcorders automatically stop when you select another device.
• Some devices may be displayed in the Device List as 'UNKNOWN'.
This may happen when the device does not contain the proper information or it cannot be read.
• Some devices may not be recognized and may be disconnected from the 1394 connection when they are turned off.
Through D-Net, you can connect another IEEE1394 compatible TV. If the TV is connected, the TV is listed in the
D-Net Devices. At this point, the screen that appears when the TV is selected is determined by the specifications of the
connected TV.
What is Digital TS? : DTV packages digital data (video, audio and data) into 188 byte units using the MPEG-2 algorithm
and transmits the data unit. It is called Digital Transport Stream or Digital TS.
When a SAMSUNG DTV which supports D-Net is connected to another TV, it only transmits Radio Frequency (RF) of the
selected DTV.
• When connecting more than one STB, some STBs may not be displayed in the Device List due to STB specifications or
defects.
Even if the device is displayed in the Device List, the connection may fail.
In this case, you have to discover which device is defective by removing them one by one.
• When multiple devices are connected, some devices may appear and then disappear periodically in the Device List, as
some devices may malfunction.
If this occurs, you have to discover and remove the defective device from the connection by removing the devices one by
one.
• When multiple devices are connected, the response time may be relatively long when selecting a device.
This may happen when there is a device that malfunctions and degrades the 1394 connection speed.
At this time, some of the functions of AV-HDD or D-VHS may not work, and the stream connection may fail.
If this occurs, you have to discover and remove the defective device from the connection by removing the devices one by
one.
• When AV-HDD or D-VHS is being played, and you press the Pause button, some products may show the "Scrambled
Channel or weak signal" message on the TV screen instead of a still picture as there is no video stream from the product.
• If the number of connected IEEE 1394 devices exceeds 10, it may cause abnormal operation.
– Disconnect the malfunctioning device and then try again.
• When multiple devices are connected, and a device malfunctions while playing D-VHS or AV-HDD, you may experience
interrupted screen play.
English - 80