Connecting A Vcr; Video Connection - Samsung LN32A330J1N Quick Setup Manual

Connecting a VCR

Video Connection

TV Rear Panel
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
Each VCR has a different back panel configuration.
➣
When connecting a VCR, match the color of the connection terminal to the cable.
➣
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does
➣
not match the color of the video cable (Yellow).
VCR Rear Panel
RF Cable
3
(Not supplied)

Video Cable (Not supplied)

Audio Cable (Not supplied)
English-
Unplug the cable or antenna

from the back of the TV.
Connect the cable or antenna
2
to the ANT IN terminal on the
back of the VCR.
Connect an RF Cable between
3
the ANT OUT terminal on the
VCR and the ANT IN terminal
on the TV.
Connect a Video Cable between

the VIDEO OUT jack on the
VCR and the AV IN 1 [Y/VIDEO]
jack on the TV.
Connect Audio Cables between

the AUDIO OUT jacks on
the VCR and the AV IN 1 [R-
AUDIO-L] jacks on the TV.
If you have a "mono" (non-stereo) VCR,
➣
use a Y-connector (not supplied) to
connect to the right and left audio input
jacks of the TV. Alternatively, connect
the cable to the "R" jack. If your VCR is
stereo, you must connect two cables.