Setting Up The Tv With Your Pc - Samsung LN19R81B Owner's Instructions Manual

Setting up the TV with your PC

Image Lock:
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency as best
as possible (coarse) and Fine-tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of screen.
1. Press the SOURCE button to select PC mode.
2. P ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. P ress the ▲ or ▼ button to select "PC", then press the ENTER button.
4. P ress the ENTER button to select "Image Lock".
5. P ress the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER button.
6. P ress the ◄ or ► button to adjust the screen quality, vertical stripes may appear or the
picture may be blurry. Press the ENTER button.
7. P ress the EXIT button to exit.
Position:
Adjust the PC's screen positioning if it does not fit the TV screen.
1. Press the SOURCE button to select PC mode.
2. P ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "PC", then press the ENTER button.
4. P ress the ▲ or ▼ button to select "Position", then press the ENTER button.
5. P ress the ▲ or ▼ button to adjust the V-Position (Vertical-Position).
Press the ◄ or ► button to adjust the H-Position (Horizontal-Position).
Press the ENTER button.
6. Press the EXIT button to exit.
Image Reset:
You can replace all image settings with the factory default values.
1. Press the SOURCE button to select PC mode.
2. P ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. P ress the ▲ or ▼ button to select "PC", then press the ENTER button.
4. P ress the ▲ or ▼ button to select "Image Reset", then press the ENTER button.
5. Press the EXIT button to exit.
Auto Adjustment:
Auto adjustment allows you to set the TV to self-adjust to the incoming PC video signal.
The fine, coarse and position values are adjusted automatically.
1. Press the SOURCE button to select PC mode.
2. P ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. P ress the ▲ or ▼ button to select "PC", then press the ENTER button.
4. P ress the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER button.
5. Press the EXIT button to exit.
English - 
Plug & Play
Language : English
Time
Caption
Blue Screen : Off
PC
Light Effect : Off
Move Enter
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter
Coarse
Fine
Move Enter
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter
TV Setup
Adjust Enter
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter
Setup







Return
PC




Return
Image Lock
0

Return
PC




Return
Position
Return
PC




Return
PC




Return