Operation; Turning The Tv On And Off; Operation Turning The Tv On And Off; Plug & Play Feature - Samsung LN19R81B Owner's Instructions Manual

Operation

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently :
The following settings are available.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. S elect the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
3. T he message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
Please check that the antenna or cable TV is connected correctly.
4. P ress the ▲ or ▼ button to select "Air" or "Cable", then press the ENTER button.
5. Press the ENTER button to select "Start".
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER button at any time to interrupt the memorization process.
6. P ress the ENTER button.
Press the ◄ or ► button to move to the "Hour", "Minute" or "am/pm".
Set the "Hour", "Minute" or "am/pm" by pressing the ▲ or ▼ button.
You can also set the hour and minute by pressing the number buttons on the remote control.
7. P ress the ENTER button to confirm your setting.
The message "Enjoy your watching." is displayed.
 Language: Select your language.
 Air/Cable: S elects between terrestrial antenna connection or your local cable company TV system.
 Auto Program: T he TV automatically cycles through all of the available channels and stores them in memory.
This takes about one to two minutes.
 Clock Set: Sets the current time for the TV clock. Sets the current time for the TV clock.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ENTER button again, to select "Plug & Play".
3. The message "Start Plug & Play" is displayed.
button on the side of the panel.
English - 
Plug & Play
Start Plug & Play.
OK
Enter Exit
Plug & Play
Language : English
Time
Caption
Blue Screen : Off
PC
Light Effect : Off
Move Enter
Setup







Return