Setting The Channel Manager - Samsung LE40M9 Owner's Instructions Manual

5. Press the or button to select "Colour System", then press the ENTER/OK button.
6. Select the colour standard required by pressing the
7. Press the or button to select "Sound System", then press the ENTER/OK button.
8. Select the sound standard required by pressing the
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the
Select C (Air channel) or S (Cable channel) by pressing the
Select the required number by pressing the
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the
Press the ENTER/OK button. Search by pressing the
11. Press the or button to select "Store". Press the ENTER/OK button to select "OK".
12. Repeat steps 3 to 11 for each channel to be stored.
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.

Setting the Channel Manager

You can select these options by
simply pressing the CH MGR
button on the remote control.
or button and then press the ENTER/OK button.
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1. Press the MENU button to display the menu. Press the
to select "Channel", then press the ENTER/OK button.
2. Press the or button to select "Channel Manager",
then press the ENTER/OK button.
3. Press the ENTER/OK button again, to select "Channel Manager".
4. Press the button to select "
5. Press the or button to select the undesired channel,
then press the ENTER/OK button to cancel.
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the EXIT button to exit.
" " is active when "Child Lock" is selected to "On".
English-9
or button then, press the ENTER/OK button.
or button, then press the ENTER/OK button.
or button to select "Channel". Press the ENTER/OK button.
or button. Press the
or button to select "Search".
or button and then press the ENTER/OK button.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
" line.
button to select channel.
or button