Buick Skylark 1996-1998; Cadillac Escalade Esv/Ext/Chevrolet Avalanche/Suburban/Tahoe 2003-2006; Cadillac Fleetwood; Brougham 1990-1996 - Metra Electronics 95-2009 Installation Instructions Manual

Buick Skylark 1996-1998

1. Remove (6) 5. Remove (3)
9/32" screws inside
9/32" screws to
glove box.
remove radio.
2. Under glove box and
Continue to tab
drivers knee bolster
instructions
remove (2) plastic
panels by turning the
(2) 1/4-turn fasteners
per side.
3. Remove the (4) 9/32"
screws revealed
(2 per side).
4. Unsnap panel from
driver's side to
passenger's side.
Step 1
Step 2
Cadillac Escalade ESV/EXT/
Chevrolet Avalanche/Suburban/
Chevrolet Kodiak 2003-2009,
Chevrolet Silverado/GMC
Sierra 2003-2006, Chevrolet
Silverado Classic/GMC Sierra
Classic 2007, GMC Top Kick
2005-2009, GMC Yukon/
1. Unsnap and remove dash bezel. (Figure A)
2. Remove (3) 9/32" screws and remove radio.
Step 5
Continue to tab instructions
Step 1 Step 1
Step 2
(Figure A)
Dash Disassembly
Tahoe 2003-2006,
Denali/XL 2003-2006
6

Cadillac Fleetwood/

Brougham 1990-1996

1. Carefully unsnap trim panel above A/C controls.
(Figure A)
2. Remove (2) 7mm screws at the top of the radio/air
conditioning bezel, then unclip panel and remove.
(Figure B & C)
3. Remove (4) 7mm screws that hold the radio in,
slide radio out, unplug the radio harnesses and
remove radio. (Figure D)
Continue to Radio Bracket Disassembly (pg. 7)
(Figure A)