Holland FW0070 Installation, Operation And Maintenance Manual page 5

12. If the fifth wheel is to be mounted using
a mounting plate (bracket with mounting
base), refer to TABLE 1 for minimum
plate thickness recommendations.
DO NOT use U-bolts in fifth
wheel installations. Use only
new Grade 8 bolts and new
Grade C lock nuts, sized 5/8"
minimum diameter. Failure to
do so may result in structural
failure of the installation with a
potential loss of the fifth wheel
assembly, mounting structure,
and/or trailer and may result in
death or serious injury.
Table 1
Fifth Wheel
Vertical Capacity
12,000 lbs.
20,000 lbs.
40,000/45,000 lbs.
50,000/55,000 lbs.
62,500/70,000 lbs.
100,000 lbs.
165,000 lbs.
XL-FW482 Rev C · 2016-07-05 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
13. Trailer pick-up ramps are recommended at
the rear of the truck-tractor frame.
14. When mounting to aluminum frames,
follow the tractor manufacturer's
recommendations. HOLLAND
a stationary mounting angle intended for
use with aluminum frames. Contact
SAF-HOLLAND
distributors for availability.
15. Review, in addition the specific
information on the following pages for
each type of fifth wheel mounting, as well
as "Inspection and Lubrication Prior to
Use" on page 13 of this publication.
Minimum Mounting
Angle Thickness
1/4"
5/16"
5/16"
3/8"
1/2"
3/4"
3/4"
Installation Procedures
has available
®
and SAF-HOLLAND
®
Minimum Mounting
Plate Thickness
1/4"
1/4"
5/16"
3/8"
1/2"
3/4"
1"
®
5