Preparing Before Installing Wall-Mount; Installing The Stand - Samsung BN68-02135A Quick Setup Manual

Preparing before installing Wall-Mount

Case A.
Installing the SAMSUNG Wall-Mount
1. Install the Wall Mount with a torque range of 15kgf·cm or less. Use care as the parts can be damaged if the torque is out of the specified
range.
. Accessory Kit contains Holder–Ring [2] for installing another company's Wall-Mount on a Samsung TV.. (Case B) Screw down the hole
[1] when installing wall-mount on the wall.

Installing the Stand

Warning
Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury.
1. Attach your PDP TV to the stand.
Two or more people should carry the TV. Never lay the TV on the floor because of possible
N
damage to the screen. Always store the TV upright.
The product color and shape may vary depending on the model.
N
. Using the 5 screws for securing the stand base and the TV, firmly attach the TV to the stand
base.
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV
N
placed down, it may lean to one side.
. When installing your TV on a wall, close the cover 1 on the stand-base connection using
one screws.
Case B.
Installing another company's Wall-Mount
English - 
1