Setting Up The Tv With Your Pc; Sound Control; Changing The Sound Standard - Samsung BN68-01700A-00 User Manual

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.
N
Auto Adjustment
❑
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC
video signal. The values of fine, coarse and position are adjusted automatically.
This function does not work in DVI-HDMI mode.
N
Press the TOOLS button to display "Tools" menu. You can also set the Auto
T
Adjustment by selecting "Tools → Auto Adjustment".
Screen
❑
Coarse / Fine: The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed

by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been
reduced, readjust the picture so that it is aligned on the center of screen.
PC Position: Adjust the PC's screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the

Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset: You can replace all image settings with the factory default values.


Sound Control

Changing the Sound Standard

Mode → Standard / Music / Movie / Speech / Custom
❑
You can select the type of special sound effect to be used when watching a
given broadcast.
Press the TOOLS button to display "Tools" menu. You can also configure
T
the sound mode by selecting "Tools → Sound Mode".
Equalizer
❑
The sound settings can be adjusted to suit your personal preferences.
Mode: You can select a sound mode to suit your personal preferences.

Balance: Controls the balance between the right and left speakers.

100Hz / 300Hz / 1kHz / 2kHz / 3kHz / 10kHz (Bandwidth Adjustment): To

adjust the level of different bandwidth frequencies
Reset: Resets the equalizer settings to the default values.

SRS TruSurround XT → Off / On
❑
TruSurround XT is a patented SRS technology that solves the problem of
playing 5.1 multichannel content over two speakers. TruSurround delivers
a compelling, virtual surround sound experience through any two-speaker
playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
Press the TOOLS button to display "Tools" menu. You can also set the SRS TruSurround XT by selecting "Tools → SRS
T
TS XT".
TruSurround XT, SRS and
technology is incorporated under license from SRS Labs, Inc.
English - 
Symbol are trademarks of SRS Labs, Inc. TruSurround XT
Brightness : 45
Sharpness : 50
Auto Adjustment
Screen
Detailed Settings
Picture Options
Picture Reset
Mode : Custom
Equalizer
SRS TruSurround XT : Off
Audio Language : ----
Audio Format : ----
Audio Description
Auto Volume : Off
Select Speaker : TV Speaker
Sound Select : Main
Sound Reset
Select Speaker : TV Speaker
Sound Select : Main
Sound Reset
►
►
►