Samsung 4240 Owner's Instructions Manual page 61

BN68-00597A-01 4/2/04
Installing the Speakers
Parts
The actual product may differ
slightly from the illustration.
Speakers
Middle Cabinet
(Wall Mount Only)
Speaker Dust Cover
Speaker Cable
Screws
Screw Screw
: 6EA : 4EA
Bracket Pads
6:40 PM Page 61
(continued)
How to Assemble the Speakers (Wall Mount)
Remove the screws indicated on the rear of the PDP (6 screws on the
left and right sides, 2 screws on the center).
Attach the Bracket Pads to the Speaker's Guide Bracket.
2 EA
Set the Speaker Guide Bracket into the square grooves located on
either side of the PDP's bottom rear and secure it with the provided
screws , . Secure the Middle Cabinet to the center of the PDP
with a screw . (Always use the proper screws, as indicated.)
1 EA
Screw
Screw
Secure the Speaker Dust Cover by setting it into the grooves
located on the front side of the speakers.
1 EA
Connect the speakers to the PDP using the speaker cable.
The connection terminals are on the rear side of both the PDP and
the speakers. (Match the color coded terminals and cables.)
WARNING
1. When moving the PDP with the speakers attached, be sure to hold on to the PDP
to prevent damage. (Damage may occur to the speaker connecting brackets or
the speakers.)
2. Speakers of 8Ω Impedance, 15W Nom. Power, 30W Max. Power is recommended.
3 EA
Bracket Pads
BLACK RED
BLACK RED
ENG
61