Table of Contents
Advertisement
BN68-00597A-01
4/2/04
Adjusting the Picture Settings
Your television has several settings which allow you to control
picture quality.
1
Press the MENU button.
Result:
The main menu is displayed.
Press the † or ... button to select Picture.
2
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Select the required option (Custom, Colour Tone) pressing the
† or ... button.
Press the † or ... button to select Custom. Press the ENTER
5
(
) button.
Result:
The Custom menu is displayed.
6
Press the ENTER (
The options are displayed in the following order.
Custom : Contrast, Brightness, Sharpness, Colour,
Tint(NTSC ONLY)
Custom Options available in PC, DVI Mode: Contrast,
Brightness, Sharpness.
The horizontal bar is displayed. Move the horizontal bar's
cursor left or right by pressing the œ or √ button.
When the picture mode is set to Custom, the settings values
may vary depending on the input source.
(ex. RF, Video, Component, PC or DVI)
If you make any changes to these settings, the picture
standard is automatically switched to the Custom.
Colour Tone : Cool2, Cool1, Normal, Warm1, Warm2
7
When you are satisfied with the settings, press the EXIT/TV (
button to return to normal viewing.
If you make any changes to these settings, the picture
standard is automatically switched to the Custom.
6:38 PM
Page 27
) button.
) button to change the setting.
TV
Mode
Custom
Colour Tone
Colour Control
Film Mode
Size
DNIe
PIP
Move
TV
Contrast
Brightness
Sharpness
Colour
Tint
G50
Move
Contrast
TV
Mode
Custom
Colour Tone
Colour Control
Film Mode
Size
DNIe
PIP
Move
)
27
ENG
Picture
√ √
: Dynamic
√ √
√ √
: Normal
√ √
√ √
: Off
√ √
: 16 : 9
√ √
: On
√ √
Enter
Return
Custom
70
50
70
50
R50
Enter
Return
70
Picture
: Dynamic
: Normal
Cool2
Cool1
: Off
Normal
: 16 : 9
Warm1
: On
Warm2
Enter
Return
Advertisement
Table of Contents
