Memorizing The Channels - Samsung SP-R4232 Quick Setup Manual

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable
channels. After the available channels are memorized, use the CH
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the
channels (automatic) and adding and deleting channels (manual).
Selecting a broadcast source
Before your television can begin memorizing the available channels, you must specify the type of
signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button. Press the ▲ or ▼ button to
select "Channel", then press the ENTER button.
2
Press the ▲ or ▼ button to select "Auto Program",
then press the ENTER button.
3
Press the ▲ or ▼ button to select the antenna
connection, then press the ENTER button.
Notes
• Air : "Air" antenna signal.
• Cable : "Cable" antenna signal.
• Air + Cable : "Air" and "Cable" antenna signals.
If the CableCARD is inserted into the "CableCARD"
slot on the rear panel, "Cable" and "Air + Cable"
are not available.
T V
T V
T V
T V
English-13
and CH buttons to scan
Channel
Antenna : Air
Auto Program
Add / Delete
Favorite Channels
Name
Fine Tune
†
More
Move Enter
Channel
Antenna : Air
Auto Program
Add / Delete
Favorite Channels
Name
Fine Tune
†
More
Move Enter
Auto Program
Select the antennas to memorize
Air Start
Cable
Start
Air + Cable
Start
Move Enter
Auto Program
Select the antennas to memorize
Start
Air
Start
Cable
Air + Cable Start
Move Enter
√
√
√
√
√
√
Return
√
√
√
√
√
√
Return
Return
Return