HP StorageWorks XP10000 User Manual page 75

Table 25 BC error codes (continued)
Error Description
Code
0852 Command Reject. P-VOL and S-VOL are used from
HOST or by CA.
0880- Logical contradiction.
08FF
0C70 A P-VOL is not installed.
0C71 The P-VOL cannot be used.
0C72 The P-VOL is being formatted.
0C80 The S-VOL is not installed.
0C81 The S-VOL cannot be used.
0C82 The S-VOL is being formatted.
0C90 The volume to be Reserved is not installed.
0C91 The volume to be Reserved cannot be used.
0C92 The volume to be Reserved is being formatted.
1001 Logical contradiction.
1002 Logical contradiction.
1003 Logical contradiction.
1004 Logical contradiction.
1005 Logical contradiction.
1007 Logical contradiction.
1009 The number of BC pairs exceeded the maximum.
1010 Logical contradiction.
1011 The number of the volume specified to be a Reserve
volume has already been used for a Reserve
volume.
1012 The number of the volume specified to be a Reserve
volume has already been used for a primary BC
volume.
1013 The number of the volume specified to be a Reserve
volume has already been used for a hierarchical
control primary volume.
1014 The number of the volume specified to be a Reserve
volume has already been used for a hierarchical
control destination volume.
1015 The volume specified to be a Reserve volume is not
set as a Reserve volume.
1016 The volume can appropriately be allocated as an
S-VOL does not exist among Reserve volumes.
Corrective Action
Disconnect from the host, or cancel Continuous
Access XP path.
Call HP technical support for assistance.
Volumes that are not installed cannot be
processed.
Call HP technical support to make the P-VOL status
normal.
Wait until formatting the P-VOL completes.
Volumes that are not installed cannot be
processed.
Call HP technical support to make the P-VOL status
normal.
Wait until formatting the S-VOL completes.
Volumes that are not installed cannot be
processed.
Call HP technical support to make the volume
status normal.
Wait until formatting the volume completes.
Call HP technical support for assistance.
Call HP technical support for assistance.
Call HP technical support for assistance.
Call HP technical support for assistance.
Call HP technical support for assistance.
Call HP technical support for assistance.
Delete some of the pairs.
Call HP technical support for assistance.
Change the volume number for specifying a
Reserve volume.
Change the volume number for specifying a
Reserve volume.
Change the volume number for specifying a
Reserve volume.
Change the volume number for specifying a
Reserve volume.
Check volume status.
Delete any Reserve volume that can be allocated
as an S-VOL.
Business Copy XP user guide for the XP10000/XP12000 75