Singer S14-78 Instruction Manual page 35

• If the cord connected with the foot control is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person, in order to avoid a hazard.
• This sewing machine is provided with double insulation. Use only identical replacement parts. See
instructions for Servicing of Double-Insulated Appliances.
SAVE THESE INSTRUCTIONS
FOR EUROPE ONLY:
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
The noise level under normal operating conditions is less than 78 db.
The machine must only be used with foot control of type 4C-316B (110-125V), 4C-326G (230V), 4C-
336G (240V) manufactured by Wakaho Electric Ind. Co. Ltd. (Vietnam).
FOR OUTSIDE EUROPE:
This sewing machine is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the sewing machine by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the sewing machine.
The noise level under normal operating conditions is less than 78 db.
The machine must only be used with foot control of type 4C-316B (110-125V), 4C-326G (230V), 4C-
336G (240V) manufactured by Wakaho Electric Ind. Co. Ltd. (Vietnam).
SERVICING OF DOUBLE INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding. No ground
means is provided on a double-insulated product, nor should a means for grounding be added to the
product. Servicing of a double-insulated product requires extreme care and knowledge of the system
and should be done only by qualified service personnel. Replacement parts for a double-insulated
product must be identical to those parts in the product. A double-insulated product is marked with the
words 'DOUBLE INSULATION' or 'DOUBLE INSULATED'.