General Laser Tool Safety Warnings - Skil ME981901 Owner's Manual

GENERAL LASER TOOL SAFETY WARNINGS

READ ALL INSTRUCTIONS BEFORE USING THE
TOOL!
WARNING
not stare into beam. Class II laser
product. Turn the laser beam on only
when using this tool.
Do not remove or deface any
product labels .
Avoid direct eye exposure . The laser
beam can cause flash blindness.
Do not operate the tool around children
or allow children to operate the tool.
Do not place the tool in a position
that may cause anyone to stare at the
laser beam, whether intentionally or
unintentionally.
Do not use on surfaces such as
sheet steel that have shiny, reflective
surfaces. The shiny surface could
reflect the beam back at the operator.
Always turn the laser tool off
when not in use . Leaving the tool
on increases the risk of someone
inadvertently staring into the laser
beam.
Do not attempt to modify the
performance of this laser device in any
way. This may result in a dangerous
exposure to laser radiation.
LASER
RADIATION . Do
AVOID EXPOSURE/EVITE LA EXPOSICIÓN/
ÉVITEZ L'EXPOSITION
LASER RADIATION IS EMITTED FROM THIS
APERTURE
LA RADIACIÓN LÁSER SE EMITE DE ESTA
ABERTURA
CET OUTIL PRODUIT UN RAYONNEMENT LASER
CAUTION/PRECAUCIÓN/ATTENTION
LASER RADIATION-DO NOT STARE
INTO BEAM
RADIACIÓN LÁSER: NO MIRE
DIRECTAMENTE EL RAYO
RAYONNEMENT LASER – NE FIXEZ
PAS DES YEUX LE RAYON LASER
635nm, OUTPUT < 1mW/CLASS II LASER
PRODUCT 3.7V 500mAh Li-Polymer
COMPLIES WITH 21 CFR PARTS 1040. 1 0 AND
1040. 1 1
PRODUCTO LÁSER CON SALIDA < 1mW.
CLASE II, 635nm, 3,7V
de litio
CUMPLE CON LAS SECCIONES 21 CFR
1040.10 Y 1040.11
635nm, SORTIE < 1 mW/PRODUIT LASER DE
CLASSE II Pile au lithium-polymère de
3,7 V, 500 mAh
CONFORME AUX NORMES 21CFR ARTICLES
1040.10 ET 1040.11
CAUTION: Risk of re and burns. Do not open,
crush, heat above 100° C (212° F) or incinerate.
PRECAUCIÓN : Riesgo de incendio y
quemaduras. No abra, triture, permita que esté a
mayor temperatura que 100° C (212 °F) ni
incinere.
ATTENTION : Risque d'incendie et de brûlures.
N'ouvrez pas le produit, ne l'écrasez pas, ne le
chauffez pas à plus de 100 ºC (212°F) et ne
l'incinérez pas.
Model / Modelo /
Modèle: ME981901
1.85Wh
CAN ICES-3(B)/NMB-3(B)
MADE IN CHINA /
HECHO EN CHINA /
FABRIQUÉ EN CHINE
SERIAL NO./ SERIE NO./ NUMÉRO DE SÉRIE
500mAh polímero
3