Memorizing The Channels; Selecting The Video Signal-Source - Samsung 00956L Instruction Manual

Memorizing the Channels

Selecting the Video Signal-source

This feature allows you to manually set the DVD-VCR's tuner band to Antenna or Cable, whichever you
connected to the Antenna In jack during initial setup.
Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong
channel numbers.
1
Press the MENU button.
2
Press the buttons to
select Setup, then press the
or ENTER button.
3
Press the buttons to
select Channel, then press the
or ENTER button.
4
Press the or ENTER button
to select Cable TV or
Antenna.
I S
N I T I A L E T U P
- Cable TV: Select this if the DVD-VCR
is connected to Cable TV.
- Antenna: Select this if the DVD-VCR
is connected to an indoor or outdoor
VHF/UHF antenna.
ENG-28