Troubleshooting (Vcr) - Samsung DVD-VR357 Instruction Manual

Hide thumbs Also See for DVD-VR357:
Table of Contents

Advertisement

Troubleshooting (VCR)

Before contacting a Samsung authorized service center, perform the following simple checks.
Problem
No power
You cannot insert a video cassette
Timer recording was unsuccessful
No playback picture or the picture is
distorted
When the ► II button is pressed during
playback, the still picture has severe
"noise bar" streaks
Video Head Cleaning
If you are unable to solve the problem after reading the above instructions, note:
• The model and serial number on the rear of your DVD Recorder & VCR
• The warranty information
• A clear description of the problem
Then contact your nearest SAMSUNG authorized service center.
Explanation/Solution
• Check that the power plug is connected to a wall outlet.
• Have you pressed the POWER button?
• A video cassette can only be inserted with the window side up and the
safety tab facing you.
• Re-check the recording start/stop time settings and the current time
• Check whether you insert a tape which has enough time record
• Check to see if you are using a prerecorded tape.
• A still picture may have "noise bars", depending on the condition of the
tape. Press the TRK/CBC CH/TV CH ( / ) buttons during slow motion
to minimize this effect.
• If poor pictures appear on a variety of cassettes, the video heads may
need cleaning. This is not a common problem and unless it appears, the
heads should not be cleaned.
When cleaning the video heads, read all instructions provided with
the head cleaning cassette. Incorrect head cleaning can permanently
damage the video heads.
English - 80

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents