Samsung DVD-VR357 Instruction Manual page 63

DVD-Recorder
VCR-->DVD
DVD-RAM(VR)
No. Start End
01 00 : 00: 37 00:03:45
Play
02 : : : :
Copy
Delete
00:01:07
STOP
Copy All
MOVE ENTER RETURN EXIT
DVD-Recorder
VCR-->DVD
DVD-RAM(VR)
No. Start End
01 00 : 00: 37 00:03:45
02 : : : :
00:01:07
RPS
Copy All
MOVE ENTER RETURN EXIT
▌ To Copy from VCR to DVD
1. With the unit in Stop mode, press the MENU button in stop mode.
2. Press the ▲▼ buttons to select Copy, then press the ENTER or ►
Edit
►
button.
►
3. Press the ▲▼ buttons to select VCR -- > DVD, then press the ENTER
or ► button.
4. You can use the ► II, I ◄ ◄ or ► ► I, ◄ ◄ or ► ► buttons to search for the
Start position.
Press the ENTER button at the start point.
5. You can use the ► II, I ◄ ◄ or ► ► I, ◄ ◄ or ► ► buttons to search for the
end position.
Press the ENTER button at the end point.
Edit
►
• A copylist will be generated. Repeat the above steps to create the
►
copylist.
• In VCR mode, the copylist cannot be saved.
6. Press the ▲▼ buttons to select desired copylist, then press the
ENTER or ► button.
7. Press the ▲▼ buttons to select Copy, then press the ENTER or ►
button.
• The VCR will fast forward, searching for a start position and then
automatically start a copy.
• The Start and End points may not match up exactly.
• If you want to copy all content, select Copy All.
▌ Direct Copy: VCR to DVD
• Insert the VHS tape you want to copy.
• Insert a recordable DVD disc.
• Press DVD copy button on front panel or remote control(TO DVD).
• To stop recording press the STOP button.
English - 63