Jusb1~2: Usb 2.0 Connectors - MSI H370 GAMING PLUS User Manual

Charger Port
The JUSB4 connector is a charger port which can increase USB power output for fast
charging your smartphone or USB-powered devices. The Charger Port is hardware
controlled by motherboard chip, it can still charge your device in suspend, hibernate
state or even shutdown states. However, when you boot the computer into Windows
you will need to install the MSI
Charging mode.
Watch the video to learn how to charge the smartphone with Super-
Charger.
http://youtu.be/FCyvjr5NbOw
Important
When the Charging mode is enabled, the Charger Port data syncing will be disabled.

JUSB1~2: USB 2.0 Connectors

These connectors allow you to connect USB 2.0 ports on the front panel.
Important
Note that the VCC and Ground pins must be connected correctly to avoid possible
y
damage.
In order to recharge your iPad,iPhone and iPod through USB ports, please install
y
MSI SUPER CHARGER utility.
®
34
Overview of Components
SUPER CHARGER application to turn ON/OFF the
®
Video Demonstration
1
3
5
7
9
2 10
1 9
VCC 2
USB0- 4
USB0+ 6
Ground 8
No Pin 10
,
®
VCC
USB1-
USB1+
Ground
NC