Power Precautions - HP AdvanceStack Remote 2C Reference Manual

Safety and Regulatory Statements

Power Precautions

C a u t i o n
N o t e
18
Power Precautions
Follow these precautions when unplugging and plugging in power to the
Remote 2C as well as adding or removing modules.
If your installation requires a different power cord than the one supplied with
the Remote 2C, be sure to use a power cord displaying the mark of the safety
agency that defines the regulations for power cords in your country. The mark
is your assurance that the power cord can be used safely with the Remote 2C.
The Remote 2C does not have a power switch; it is powered on when the power
cord is plugged in. The Remote 2C's power supply automatically adjusts to
any AC power source between 100-127 volts and 200-240 volts. There are no
voltage range settings to configure.
When installing the Remote 2C, note that the AC outlet must be installed near
the equipment and should be easily accessible.