Changing The Ctl & Assign Settings - Boss VE-500 Owner's Manual

REVERB STRUCTURE
STRUCTURE1
FX OUT1
FX OUT2 REV/DLY1
FX OUT3
REV/DLY2
FX OUT4
STRUCTURE2
FX OUT1
REV/DLY1
FX OUT2
REV/DLY2
FX OUT3
FX OUT4
STRUCTURE3
FX OUT1
REV/DLY1
FX OUT2
REV/DLY2
FX OUT3
FX OUT4
NOTE
REVERB STRUCTURE 3 can be selected only if FX
STRUCTURE is 3 or 4.
Changing the CTL & ASSIGN Settings
You can operate a variety of parameters by
making CTL and ASSIGN settings for each patch.
Reverb
1.
In the effect select screen, use knobs
[1]–[3] to select "CTL," and then press
the [ENTER] button.
The CTL & ASSIGN screen appears.
FX OUT
2.
Use knobs [1]–[3] to select the
Reverb
controller that you want to edit.
FX OUT
An icon indicates controllers that are turned
on. Controllers that are off are indicated by
"OFF. "
Reverb
FX OUT
Controller Explanation
Specifies the parameter that is
controlled by the [?] and [=]
–
switches when in Memory mode.
* This works only in Memory mode.
Specifies the parameter that is
controlled by the [?] ([FX1]) and
[=] ([FX2]) switches when in Manual
–
mode.
* This works only in Manual mode.
Specifies the parameter that is
controlled by the [HARMONY]
switch.
Specifies the parameter that is
controlled by an expression pedal
(EXP) connected to the CTL 1, 2/
EXP jack.
Specifies the parameter that is
controlled by a footswitch (CTL 1–2)
connected to the CTL 1, 2/EXP jack.
Specifies the parameter that is
controlled by pressing the [?] and
[=] switches simultaneously.
Specifies the parameter that
is controlled by pressing the
[=] and [HARMONY] switches
simultaneously.
Editing a Patch
13