Lenovo ThinkAgile HX1521-R User Manual page 52

Before installing a hot-swap drive:
1. If the drive bay has a drive filler installed, pinch the two tabs to remove the drive filler. Keep the drive filler
in a safe place.
Figure 16. 2.5-inch drive filler removal
Figure 17. 3.5-inch drive filler removal
2. Touch the static-protective package that contains the new drive to any unpainted surface on the outside
of the server. Then, take the new drive out of the package and place it on a static-protective surface.
To install a hot-swap drive, complete the following steps:
Step 1. Install the hot-swap drive.
48
User Guide forThinkAgile HX1521-R Node ThinkAgile HX3521-G NodeThinkAgile HX5521 NodeThinkAgile HX5521-C
NodeThinkAgile HX7521 Node