Samsung SDC-415 SERIES Instruction Manual page 17

Camera Operation
5) When a name has been chosen, please select a position for the name display.
Please move the cursor onto 'POS' and then press the SETUP button.
Camera ID
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 1 2 3 4 5 6 7 8 9
C L R P O S E N D
The name will appear at the top left hand
corner.
Please find the position you wish to
display the name by using the 4
directional buttons, and then press the
SETUP button.
to Locate, then SET
6) Please select 'END' and then press the SETUP button to complete ID input.
COLOR
- AUTO : This camera has a function which automatically changes to the
appropriate mode for daytime or night-time. The COLOR mode is
operated for daytime, and it converts to BW mode for night-time.
- ON : The color mode is selected by default, and the modes do not change
automatically.
COLOR CCD CAMERA 32 User's Manual
FRONT DOOR
to Locate, then SET to Locate, then SET to Locate, then SET
FRONT DOOR
Note
• When the AGC is turned off, COLOR does not operate.
• When an infrared light is used, there may be a problem with focusing.
SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, it synchronizes the video signal between
cameras without a synchronous generator. The line-lock synchronization
is only used in the areas of 60Hz (NTSC Models) / 50Hz (PAL Models).
- INT : Internal synchronization
• If you choose 'LL', you can adjust the desired phase. Press the SET button.
• You can adjust the desired phase from 0 to 359.
Note
• When the power frequency is 50Hz, you can not use line-lock mode(NTSC
Models).
• When the power frequency is 60Hz, you can not use the line-lock mode(PAL
Models).
• 'Sync.' mode is fixed to 'INT' in DC 12V input power.
COLOR CCD CAMERA 33
- LL : External line-lock synchronization
User's Manual