Arrow Buttons; Connection Buttons; Using The Tool Connect Application; Turning The Laser On - DeWalt DW080LGS Instruction Manual

ENGLISH
Setting the Amount of Slope
1. Turn on Slope Mode.
2. Select the desired axis.
3. Use the Arrow buttons (Fig.
rotor head up and down.
Arrow Buttons (Fig.
A
The arrow buttons (Figure
functions depending on the operating mode of the laser unit.
• In Self-Leveling Horizontal Mode, the arrow buttons
rotate the direction of the laser beam clockwise or counter-
clockwise during rotation, or adjust the position of the laser
beam clockwise or counter-clockwise during Scan Mode.
• In Self-Leveling Vertical Mode, the arrow buttons rotate
the direction of the laser beam clockwise or counter-
clockwise during rotation, or adjust the position of the laser
beam clockwise or counter-clockwise during Scan Mode.
In Slope Mode, the arrow buttons are used to tilt the
•
laser head.

Connection Buttons

The connection buttons (Figure
different ways to wirelessly connect to the laser.
• Press the radio waves button
connect your cell phone to the Detector which is connected
to the laser.
• Press the Bluetooth button
Bluetooth on the laser. If the laser is within 100 ft (30 m),
you can use the Tool Connect
cell phone to control the laser, instead of using the remote.
Also, if the laser is dropped, disturbed, etc., it will send
messages to the Tool Connect application to inform you.

Using the Tool Connect Application

You can use Bluetooth ® capability to pair the laser with the
DEWALT Tool Connect application on your cell phone, and then
®
use your cell phone to control the laser (Figure
1. From either
DEWALT Tool Connect application to your cell phone.
®
2. On the laser keypad, press
3. On the laser keypad, press
Bluetooth does not turn on, replace the coin cell battery (3V
CR2430) on the bottom of the laser.)
4. Using the DEWALT Tool Connect application, select the
®
product type (Rotary Laser) and pair your cell phone to the
DW08 LRS/DW08 LGS.
0 0
, and ) to tilt the laser
6 7
B
)
,
R
and ) are used for different
6 7
A
10 and 13 ) provide
A
(Figure ) to
10
A
(Figure ) to enable
13
A
application on your
).
N
or , download the
to turn the laser on.
to turn on Bluetooth ®. ( If
When the laser is on, the DEWALT
display information about the laser:
• A laser safety icon to let you know the laser is on.
• The laser's current settings for RPM, Slope, etc.
• If the current settings are one of the "favorite settings" you
have saved for the laser, it will display the name of that
setting (e.g., Main St - Site 1).
• If the Tracking feature is on, the application will know
where the laser is and will let you know if the laser has
been taken and is now out-of-range.
THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED
BY BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY STANLEY TOOLS IS UNDER
LICENSE. APPLE AND THE APPLE LOGO ARE TRADEMARKS OF APPLE INC., REGISTERED
IN THE U.S. AND OTHER COUNTRIES. APP STORE IS A SERVICE MARK OF APPLE INC.,
REGISTERED IN THE U.S. AND OTHER COUNTRIES. GOOGLE PLAY AND THE GOOGLE PLAY
LOGO ARE TRADEMARKS OF GOOGLE INC.
Turning the Laser On (Fig.
1. Insert the fully charged 20V battery pack as shown in
Figure .-
E
2. Gently press the power button
The power LED indicator light (Figure
-
illuminate.
Self-leveling mode is activated automatically and the
-
laser unit will self-level. Once the laser unit is level, the
beam will rotate clockwise once at 600 RPM.
After 10 sec., Hi Mode (Anti- Drift) is activated
-
automatically and the Hi LED (Figure
illuminate.
3. Press the speed/rotation button (Figure
rotation speed. The direction can be changed using buttons
6 and 7 .
4. Press the Scan button (Figure
scan in 0°, 15°, 45°, or 90° degree mode.
If you turn ON Slope Mode, the Slope LED (Figure
will light. If using X-axis leveling, the X-axis LED (Figure
24 ) will light, or if using Y-axis leveling, the Y-axis LED (Figure
) will light instead.
25
A
Calibrating the Laser (Fig. O, P)
Field calibration checks should be done frequently. This section
provides instructions for performing simple field calibration
checks of your D WALT Rotary Laser. Field calibration checks
e
do not calibrate the laser. That is, these checks do not correct
errors in the leveling or plumbing capability of the laser. Instead,
the checks indicate whether or not the laser is providing a
correct level and plumb line. These checks cannot take the
place of professional calibration performed by a D
service center.
13
Tool Connect application will
®
, )
E B
to power ON the laser.
) will
9
A
8 ) will
A
) to adjust the
3
A
4 ) to set the laser to
A
)
12
A
A
WALT
e