Menu Contents And Descriptions - Teac LE43A718UHD User Manual

Menu Contents and Descriptions

System - Picture Menu
Mode
You can change the picture mode to suit your preference or requirements. Picture mode
can be set to one of these options: Cinema, Game(optional), Sports, Dynamic and
Natural. Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby
Vision Bright picture mode options will be available instead of Cinema and Natural modes.
Contrast Adjusts the light and dark values on the screen
Brightness Adjusts the brightness values on the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto, Screen
Energy Saving
Off or Off.
Note: Available options may differ depending on the selected Mode.
Backlight
This setting controls the backlight level. The backlight function will be inactive if the Energy
Saving is set to an option other then Custom.
Advanced
Dynamic
Settings
Contrast
Noise
Reduction
Colour
Temp
White Point
Picture
Zoom
Film Mode
Skin Tone
Colour Shift
HDMI Full
Range
Sets the notification appearance preference for Dolby Vision contents. When set as On,
Dolby Vision
Dolby Vision logo will be displayed on the upper right side of the screen when Dolby Vision
Notification
content is detected.
PC Position Appears only when the input source is set to VGA/PC.
Autoposition
H Position
V Position
Dot Clock
Phase
Reset Resets the picture settings to factory default settings (except Game mode).
Note: While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead,
VGA mode settings will be added to the Picture Settings while in PC mode.
You can change the dynamic contrast ratio to desired value.
If the signal is weak and the picture is noisy, use the Noise Reduction
setting to reduce the amount of noise.
Sets the desired colour temperature value. Cool, Normal, Warm and
Custom options are available.
If the Colour Temp option is set as Custom, this setting will be
available. Increase the 'warmth' or 'coolness' of the picture by pressing
Left or Right buttons.
Sets the desired image size format.
Films are recorded at a different number of frames per second to
normal television programmes. Turn this feature on when you are
watching films to see the fast motion scenes clearly.
Skin tone can be changed between -5 and 5.
Adjust the desired colour tone.
While watching from a HDMI source, this feature will be visible. You
can use this feature to enhance blackness in the picture.
Automatically optimizes the display. Press OK to optimize.
This item shifts the image horizontally to the right hand side or left hand
side of the screen.
This item shifts the image vertically towards the top or bottom of the
screen.
Dot Clock adjustments correct the interference that appear as vertical
banding in dot intensive presentations like spreadsheets or paragraphs
or text in smaller fonts.
Depending on the input source(computer etc.) you may see a hazy or
noisy picture on the screen. You can use phase to get a clearer picture
by trial and error.
19