Lcd Brightness; Selecting Video Out Type; Quick View; Initialisation - Samsung L Series User Manual

LCD brightness

■ You can adjust the LCD brightness.

Selecting Video out type

■ The Movie output signal from the camera can be
NTSC or PAL. Your choice of output will be
governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can
support only BDGHI.
INFORMATION
● NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
● PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany,
U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore,
Spain, Sweden, Switzerland, Thailand, Norway.
《56》
SETUP
SOund
USB
LCD
Video Out

Quick View

Back:
SETUP
USB
LCD
Video Out
Quick View
Reset
Back:
Yellow - Video
White - sound
Selecting Video out type
INFORMATION
● When using a TV as an external monitor, you will need to select the external
Dark
Normal
or AV channel of the TV.
Bright
● There will be a digital noise on the external monitor, but it is not a malfunction.
● If the image is not in the centre of the screen, use the TV controls to centre it.
Set:OK
● The menu functions are the same as those indicated on the LCD monitor.
Quick view
■ If you enable Quick View before capturing an image, you can view the image
NTSC
PAL
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
Set:OK
[Off]
[0.5, 1, 3sec] : The captured image is briefly

Initialisation

■ All camera menu and function settings will be restored to their default values.
However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be
changed.
If [No] is selected : Settings will not be restored to
If [Yes] is selected : All settings will be restored to
: The quick view function can't be
activated.
displayed during the selected time.
their defaults.
their defaults.
SETUP
USB off
LCD 0.5 sec
Video Out 1 sec
Quick View 3 sec
Reset
Back: Set:OK
SETUP
USB
LCD
Video Out
Quick View No
Reset Yes
Back: Set:OK