Setup menu 1
[ Start up image ]
You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
Setup1
LCD
Normal
AF Lamp
On
Start Image
Off
Start up image : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image with the [User Image] in the
[RESIZE] menu in the play mode.
- The start-up image will not be deleted by [DELETE] or [Format] menu.
- The User images will be deleted by [Reset] menu.
Setup1 / Start Image
OK
Setup menu 2
[ Quick view ]
If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
Setup 2
Quick View
0.5sec
Power Off
3min
LCD Save
Off
Calibration
Sub menus
[Off]
: The quick view function can't be activated.
[0.5, 1, 3 sec] : The captured image is briefly displayed during the selected time.
Quick View
Off
0.5 sec
1 sec
3 sec
85