Software Notes; About The Software - Samsung I7 User Manual

Software Notes

Please ensure that you read the software instructions carefully before use.
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user
manual be reproduced.
Copyrights for software are licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your
camera. We cannot, however, be held responsible in any way for damage
caused by inappropriate use.
Using a Hand-made PC or a PC and OS that has not been guaranteed by the
manufacturer is not covered by the Samsung warranty.
Before reading these instructions, you should have a basic knowledge of
computers and O/S (Operating Systems).
System Requirements
For Windows
PC with processor better than Pentium II
450MHz (Pentium 800MHz recommended)
Windows 98SE/2000/ME/XP/Vista
Minimum 128MB RAM (Over 512MB
recommended)
200MB of available hard disk space
1024x768 pixels, 16-bit colour
display compatible monitor
(24-bit colour display recommended)
Microsoft DirectX 9.0
Digimax Converter
PC with processor better than
Pentium III 500MHz
(Pentium recommended)
Windows 2000/XP/Vista
110
For Macintosh
Power Mac G3 or later / Intel Processor
Mac OS 10.1 ~ 10.4
Minimum 256MB RAM
110MB of available hard-disk space
CD Rom
USB Port
For playing back a movie clip
MPlayer

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
computer]. A USB Storage Driver is provided only for Windows. A USB Driver for
MAC is not included with the Application CD. You can use the camera with Mac
OS 10.1 ~ 10.4.
XviD codec : This makes movie clips (MPEG-4) recorded with this camera
play back on a PC.
To play back a movie clip recorded with this camera, you must install the XviD
codec. If a movie clip recorded with this camera does not play well, install this
codec. This software is only compatible with Windows.
Digimax Converter : Multimedia converting program
Multimedia (Movie, Video clip, etc) files can be converted into movie clips that
can be played back on this camera. This software is only compatible with
Windows.
Before connecting the camera to the PC, you
should first install the camera driver.
Screen Captures illustrated in this manual
is based on English Edition of Windows.