Adjusting The Sensitivity Of The Image Sensor; Setting The Range Of Automatic Correction In Auto; Using The; Images - Samsung GX-20 User Manual

Adjusting the sensitivity of the image sensor

Setting the Sensitivity

You can set the sensitivity to suit the brightness of the surroundings.
The sensitivity can be set to [AUTO 100-400] or within a sensitivity range
equivalent to ISO [100] to [6400].
1. Press the Fn button.
- The Fn menu appears.
2. Press the direction button (►) on your
camera.
- The ISO sensitivity menu appears.
3. Press the direction buttons (◄►) to select a
desired sensitivity.
096

Setting the Range of Automatic Correction in AUTO

Set range to automatically correct sensitivity
when Sensitivity is set to [AUTO].
The sensitivity is automatically corrected in
the range of [AUTO 100-400] by default.
: Exit
: Move
You can set the changeable ISO range for
automatic correction using the Fn menu.
ISO SENSITIVITY
AUTO 100 - 400
: Move : Set
Front dial
ISO SENSITIVITY
Rear dial
100
: Move : Set
● Captured images can show more noise if higher Sensitivity is set.
● Set this menu in [CUSTOM1 MENU] > [ISO Steps].
● If [Set Max ISO Range] is set to [6400] in the [CUSTOM1 MENU], ISO
sensitivity can be set to 6400.
● It is possible to see more noise in the images when setting the ISO
sensitivity to "6400."
Sets the lower sensitivity limit.
Sets the upper sensitivity limit.
When the camera is set to the following conditions, the sensitivity cannot be
set to auto.
- The exposure mode is set to Sv (Sensitivity Priority), M (Manual), B (Bulb)
or X (fl ash synchro) mode.
ISO SENSITIVITY
AUTO 100 - 400
: Move : Set