Samsung digimax U-CA 501 User Manual page 16

Instructions on how to use the memory card
INFORMATION
Don't remove the memory card when the camera status lamp(Green) is blinking as this
may cause damage to data in the memory card.
As this camera has a 16MB internal memory, you do not need to insert the memory card. To
expand memory capacity, insert a memory card. If the memory card is not inserted, an
image will be stored in the internal memory.
The camera can use SD Memory Cards and MMC (Multi Media Card).
Card
pins
Write
protect
switch
Label
[ SD(Secure Digital) memory card ]
When using a 16MB internal memory, the specified shooting capacity will be as follows.
These figures are approximate as image capacities can be affected by variables such as
subject matter.
Recorded image size
2560x1920
2048x1536
STILL
1600X1200
IMAGE
1024X768
640X480
640X480
MOVIE
CLIP
320X240
16
The SD memory card has a write protect switch
that prevents image files from being deleted or
formatted. By sliding the switch to the bottom of
the SD memory card, the data will be protected.
By sliding the switch to the top of the SD
memory card, the data protection will be
canceled. Slide the switch to the top of the SD
memory card before taking a picture.
SUPER FINE FINE
9 18
10 24
16 36
36 67
72 121
- -
- -
NORMAL 15FPS
29 -
38 -
58 -
117 -
214 -
- 35SEC
- 1MIN 25SEC
24FPS
-
-
-
-
-
20SEC
44SEC