Advertisement
D
e
D
e
LED
ACT
2.4G / 5G /
5G Signal (For D
Model)
5G Signal (For D
Model)
5G Signal (For D
Model)
5G Signal (For D
Model)
Interface
Factory Reset
Port1 PoE In
PoE Out
(for P Model)
Note
s
c
r
i
p
t
i
o
s
c
r
i
p
t
i
o
Status
Explanation
Off
The system is not ready or has failed.
Blinking
The system is ready.
On
Wireless function is ready.
Off
Wireless function is not ready.
Blinking
Data is being transmitted (sending/receiving).
The signal strength (excellent) > -50dBm.
The signal strength (good) is between -66dBm ~ -51dBm.
The signal strength (fair) is between -73dBm~ -67dBm.
No signal or the signal strength is <-73dBm.
Description
Restore the default settings. Usage: Switch on the access point. Press and
hold reset button for at least 10 seconds. VigorAP will restart with the
factory default configuration.
Before pressing the button, the cover should first be removed by rotating it
with a torque of 13 kgf-cm. After the access point has been reset, replace
the cover and lock it with the same amount of torque.
Connector for receiving power from another device.
Connector for supplying power to another device.
For the sake of safety, keep the access point away from children.
n
s
o
f
C
n
s
o
f
C
o
m
p
o
n
e
o
m
p
o
n
n
t
s
e
n
t
s
Advertisement
