Sound; Lcd Brightness - Samsung Digimax 420 User Manual

Sound

A beep will sound when you press the camera button and an error occurs.
You can check the camera condition with this function.
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3]
menu will display.
2. Select the [SETUP 3/3] menu by pressing the RIGHT button
twice.
3. Select the [SOUND] menu by pressing the UP/DOWN
button.
4. Press the RIGHT button and the cursor will shift to the
[SOUND] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN
button.
Selecting [OFF]
Selecting [LOW]
Selecting [NORMAL] : The normal sound will be activated.
Selecting [HIGH]
6. Press the OK button to confirm the setting.

LCD brightness

You may adjust the LCD brightness.
1. Rotate the mode dial to SETUP mode and the [SETUP 1/3]
menu will display.
2. Select the [SETUP 3/3] menu by pressing the RIGHT button
twice.
3. Select the [LCD] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [LCD]
sub menu.
5. Select the desired sub menu by pressing the UP/DOWN
button.
LCD brightness range : -3 ~ NORMAL ~ +3
6. Press the OK button to confirm the setting.
78
: The sound function is not activated.
: The low sound will be activated.
: The loud sound will be activated.
SETUP 3/3
SOUND NORMAL
LCD NORMAL
VIDEO OUT NTSC
QUICK VIEW 01 SEC
CHANGE :
SETUP 3/3
SOUND
OFF
LOW
NORMAL
HIGH
BACK: SET:OK
SETUP 3/3
SOUND NORMAL
LCD NORMAL
VIDEO OUT NTSC
QUICK VIEW 01 SEC
CHANGE :
SETUP 3/3
LCD
NORMAL
BACK: SET:OK