Take A Picture - Samsung Digimax 420 User Manual

Instructions
Use this camera in the following order
Set up the camera
driver

Take a picture

Insert the USB
cable
Check the camera
power
Check
[Removable Disk]
2
Before connecting the camera to a PC, via the USB cable,
you will need to set up the camera driver. Install the
camera driver that is contained in the Application S/W
CD-ROM.(p.94)
Take a picture (p.25)
Insert the supplied USB cable into the PC USB port and
the camera USB connection terminal.(p.82)
Check the camera power. If the power is turned off, slide
the camera switch to power it on.(p.28)
Open Window's EXPLORER and search for [Removable
Disk].(p.83)