Advertisement
Quick Links
Œ
Hardware Installation
The Level One ISDN Router incorporates a DHCP Server.
:
Note
If your LAN already has a DHCP Server, set DIP switch 2
ON to disable the ISDN Router's DHCP Server.
1.
Use the supplied cable to connect the WAN port to
the S/T connector on your ISDN Terminator.
2.
Connect the LAN port to a 10/100BaseT hub.
3.
Connect the supplied power supply.
•
Software Installation
1.
Insert the supplied CD-ROM. If the install program
does not start automatically, run SETUP.EXE in the
root directory.
2.
Follow the prompts to complete the installation.
3.
The setup program will now run.
- 1 -
Ž
Setup
1.
Select the Level One ISDN Router, and click "Setup".
2.
If the current IP Address is OK, you will not see the
following IP Address screen.
3.
If you wish, change the suggested values.
Then click "Change" to continue.
4.
Enter the required data on the Quick Setup screen
which appears next.
- 2 -
Internet Access (from ISP)
Account (User)
Account name provided by your ISP
Name
(Internet Service Provider).
Account
Password for the above account.
Password
IP Address
Dynamic IP addresses are the most
from ISP
common. If Fixed, use the address
provided by your ISP.
- 3 -
Advertisement
Related Manuals for LevelOne FRT2101TX
Summary of Contents for LevelOne FRT2101TX
- Page 1 Œ Ž Hardware Installation Setup Select the Level One ISDN Router, and click "Setup". If the current IP Address is OK, you will not see the following IP Address screen. The Level One ISDN Router incorporates a DHCP Server. Note If your LAN already has a DHCP Server, set DIP switch 2 ON to disable the ISDN Router's DHCP Server.
-
Page 2: Quick Install Guide
ISDN Details (from Telephone Company) Country Select your country. For USA, select the entry to match the "Switch Type" used by your telephone company. FRT2101TX SPID SPID (Service Profile Identifier) is Use the appropriate settings for your situation: (USA only) provided by your phone company.