SETTING UP THE SHOOTING FUNCTION
FLASH / LEFT button
When the menu is displayed on the LCD monitor, pressing the LEFT (
the cursor shift to the left or to the main menu.
When the menu is not displayed on the LCD monitor, the LEFT (
the FLASH (
) button.
Use the correct flash to suit the environment.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or
MACRO SHOT mode.
3. Do not turn the LCD monitor off.
4. Press the FLASH (
mode indicator displays on the LCD monitor.
5. Take a picture.
Note
Photograph within the flash range. The flash ranges are listed below.
MACRO SHOT mode
STILL IMAGE mode
The image quality is not guaranteed if the subject is too close or highly reflective.
) button until the desired FLASH
ISO
A
A
) button operates as
< Selecting Auto flash >
W
T
0.5 ~ 0.8m
0.8 ~ 3m
0.8 ~ 2m
) button makes