Driver's Seat Lumbar Support Control - Hyundai Terracan 2004 Owner's Manual

ZB060C1-E
Adjusting Seatback Angle
B080C01HP.DAG
To recline the seatback, lean forward to take
your weight off it, then pull up on the recliner
control lever at the outside edge of the seat.
Now lean back until the desired seatback angle
is achieved. To lock the seatback into position,
release the recliner control lever.
WARNING:
To minimize risk of personal injury in event
of a collision or sudden stop, both the driver
and passenger seatbacks should always be
in a nearly upright position whilst the ve-
hicle is in motion. The protection provided
by the seat belts and airbags may be re-
duced significantly when the seatbacks are
reclined. There is greater risk that the pas-
senger will slide under the belt resulting in
serious injury when the seatbacks are re-
clined.
CONTROLS AND EQUIPMENT
B080D02L-EAT
Adjustable Headrests
(Not all models)
Lock knob
B080D01HP
Headrests are designed to help reduce the risk
of neck injuries.
To raise the headrest, pull it up. To lower it,
push it down whilst pressing the lock knob.
If equipped with a horizontally adjustable type
of headrest, pull on the top.
WARNING:
o For maximum effectiveness in case of an
accident, the headrest should be adjust-
ed so the top of the headrest is at the
same height as the top of the occupant's
ears. The use of a cushion that holds the
body away from the seatback is not rec-
ommended.
o Do not operate the vehicle with the head-
rests removed as severe injury to an
occupant may occur in the event of an
accident. Headrests may provide protec-
tion against severe neck injuries when
properly adjusted.
B080E01A-EAT

Driver's Seat Lumbar Support Control

(Not all models)
B080E01HP.DAG
To adjust the lumbar support, turn the handle on
the inboard side of the seat. To increase the
amount of lumbar support, pull the lever for-
ward. To decrease it, push the lever toward the
rear.
1- 11