Antennas With 75-Ohm Round Leads; Separate Vhf And Uhf Antennas; Connecting Cable Tv; Cable Without A Cable Box - Samsung DynaFlat TXN2668WHF Owner's Instructions Manual

I
N S TA L L AT I O N

Antennas with 75-ohm Round Leads

1
Plug the antenna lead into
the VHF/UHF
terminal on the bottom of
the back panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV.
This procedure requires an optional combiner-adaptor (available at most electronics
shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner
into the VHF/UHF ter-
minal on the bottom
of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1
Plug the incoming cable
into the VHF/UHF
antenna terminal on back
of the TV.
Because this TV is
cable-ready, you do not need a
cable box to view unscrambled cable
channels.
15