Advertisement
Sound -
Mode / Equalizer / MTS
Auto Volume / Pseudo Stereo /
Turbo Plus
◆ Mode: Standard/Music/
Mode
Movie/Speech/Custom
Equalizer
You can select the type of
MTS
Auto Volume
special sound effect to be
Pseudo Stereo
Turbo Plus
used when watching a
given broadcast.
Move
➢
Press the S.MODE
button on the remote control to select one of
the standard sound settings.
◆ Equalizer
The TV has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings,
the sound mode is automatically switched to
"Custom".
◆ MTS (Multi-channel Television Sound)
Depending on the particular program being
broadcast, you can listen to Mono, Stereo, or SAP.
➢
Press the MTS button on the remote control
repeatedly to select "Stereo", "Mono", or
"SAP" (Secondary Audio Program).
◆ Auto Volume
Each broadcasting station has its own signal
conditions, and so it is not easy to adjust the
volume every time the channel is changed. This
feature lets you automatically adjust the volume of
the desired channel by lowering the sound output
when the modulation signal is high or by raising
the sound output when the modulation signal is
low.
◆ Pseudo Stereo
This feature converts a monaural sound signal into
two identical left and right channels. Once the
"Pseudo Stereo" is set to "On" or "Off", the setting
applies to the sound effects such as "Standard",
"Music", "Movie" and "Speech".
◆ Turbo Plus
This feature emphasizes the bass and treble
frequencies to add fullness to the sound.
➢
Press the TURBO button on the remote
control repeatedly to select "On" or "Off".
Sound
√ √
: Custom
Troubleshooting
√ √
√ √
: Stereo
: Off
√ √
√ √
: Off
If the TV seems to have a problem, first try this list of
√ √
: Off
possible problems and solutions. If none of these
Enter
Return
troubleshooting tips apply, then call your nearest
Samsung authorized service center.
Poor picture.
◆ Try another channel.
◆ Adjust the antenna.
◆ Check all wire connections.
Poor sound quality.
◆ Try another channel.
◆ Adjust the antenna.
No picture or sound.
◆ Try another channel.
◆ Press the TV/VIDEO button.
◆ Make sure the TV is plugged in.
◆ Check the antenna connections.
◆ Make sure the MUTE button is off.
No color, wrong colors or tints.
◆ Make sure the program is broadcast in color.
◆ Adjust the picture settings.
Picture rolls vertically.
◆ Adjust the antenna.
◆ Check all wire connections.
◆ If you are using a VCR, check the tracking.
The TV operates erratically.
◆ Unplug the TV for 30 seconds, then try operating
it again.
English - 7
Your remote control does not operate your TV.
◆ Make sure the remote has batteries.
◆ Check that the "+" and "-" ends of the batteries
are inserted correctly.
◆ Check that the batteries are drained.
The TV won't turn on.
◆ Make sure the wall outlet is working.
◆ Make sure the TV is plugged in.
◆ Make sure the remote has batteries.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control
(transmission window).
◆ Check that the "+" and "-" ends of the batteries
are inserted correctly.
◆ Check that the batteries are drained.
Advertisement
