Specifications - Sennheiser IE 800 S Instruction Manual

Comply™
▷
Roll the Comply™ ear adapters between your fingers and insert the ear canal
phones into the ears. Hold the ear canal phones for at least 15 seconds so
that the compressed Comply™ ear adapters can expand and sit snuggly in
your ear.
B
Selecting and connecting the connection cable*
• 2.5 mm stereo jack plug, balanced signal transmission, 4-pin
• 3.5 mm stereo jack plug, unbalanced signal transmission, 3-pin
• 4.4 mm Pentaconn stereo jack plug, balanced signal transmission, 5-pin
C
Optimum cable routing*
D
Cleaning*
For reasons of hygiene, the ear adapters should be replaced from time to
time. (The Comply™ ear adapters only have a durability of a few months
due to their material properties.) Spare ear adapters are available from your
Sennheiser partner. To find a Sennheiser partner in your country, search at
www.sennheiser.com.
▷
Clean the product only with a soft, dry cloth (supplied).
▷
You can clean the silicone ear adapters under lukewarm running water.
Let the ear adapters air dry at room temperature for at least 12 hours before
re-attaching them to the ear canal phones.
E
Transporting and storing the IE 800 S*

Specifications

Transducer principle
Frequency response
Frequency response
Ear coupling
Impedance
Sound pressure level
Total harmonic distortion (THD) < 0.06% (1 kHz, 94 dB)
Attenuation
Cable
dynamic, closed
5 to 46,500 Hz
diffuse-field equalized
in-ear
16 Ω
125 dB at 1 kHz, 1 V
compliant to IEC/EN 62368-1 (tested accor-
ding to EN 50332-2)
–26 dB
oxygen-free copper cable (OFC)
IE 800 S | English
rms
3