Changing Channels - Samsung CL-29Z30, CL-29Z40 Owner's Instructions Manual

If you want to reset this feature...
TV
Time
Plug & Play
Caption
Language : English
† †
More
Move Enter
Plug & Play

Changing Channels

Using the Channel Buttons
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
Using the "-" Button
Using the PRE-CH Button to select the Previous Channel
1. Press the MENU button to display the menu.
Setup
Press the ... ... or † † button to select "Setup", then press the ENTER button.
√ √
√ √
√ √
√ √
Return
2. Press the ... ... or † † button to select "Plug & Play", then press the ENTER
button.
For further details on setting up options, refer to the previous page.
➢
Plug & Play can only be accessed in the TV mode.
1. Press the CH
➢
When you press the
sequence.
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels). You will not see channels that were either
erased or not memorized. See page 16 to memorize channels.
1. Press the number buttons to go directly to a channel.
For example, to select channel 27, press "2," then "7."
The TV will change channels when you press the second number.
1. To select a channel over 100, for channel 122, press "-", then "2", then "2".
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
➢
To quickly switch between two channels that are far apart, tune to one channel,
then use the number button to select the second channel. Then use the PRE-CH
button to quickly alternate between them.
or CH button to change channels.
CH or CH
English-14
button, the TV changes channels in