Table of Contents
Advertisement
To set a camera option:
1.
Start the camera. For more information, see "Taking Pictures" on page
87.
2.
Press the right softkey
3.
Press the number key corresponding to the desired option.
•
Self-Timer: Allows you to configure a timer for Off, 5 Seconds or 10
Seconds.
•
Flash: Allows you to configure the flash to be Off, On This Shot or
Always On.
•
Fun Tools: Allows you to select either Fun Frames or Color Tones.
•
Fun Frames: Allows you to select a frame around the image before
the picture is taken. Press the navigation key left or right to select
the desired frame. Press
mode.
•
Color Tones: Allows you to select between several different color
tones by pressing the navigation key left or right. When you find
the desired tone, press
•
Controls: Allows you to set the Brightness and White Balance for
your pictures.
•
Brightness: Allows you to set the brightness level. Press the
navigation key left or right to increase or decrease the desired
brightness.
•
White Balance: Allows you to set up the white balance of the
camera automatically or manually using the different preset
modes. The modes available are:
•
Auto: Automatically adjusts the lighting.
•
Sunny: Decreases the light sensitivity for taking pictures in full
or mostly sunny conditions.
•
Cloudy: Increases light sensitivity for taking pictures under
cloudy conditions.
•
Tungsten: Adjusts the white balance to match inside lighting
conditions displayed using common household light bulbs.
•
Fluorescent: Adjusts the white balance to match inside lighting
conditions displayed using common fluorescent lighting.
•
Manual: Allows you to adjust the white balance settings
manually.
•
Settings: Allows you to change the following camera settings:
for Options.
to select and return to the camera
MENU
OK
.
MENU
OK
Pictures/Videos 90
Advertisement
Table of Contents
