Selecting The Sound Mode; Switching The Sound Off Temporarily - Samsung 14F2, 14F3, 14H4, 14H5, 14S1, 14S4, 14V5, 3366, 15K2, 15K5, 15K8, 15K9, 20F3, 20H4, 20H5, 20S1, 20S4, 20S5, 20V5, 5038, 21A3, 21 Owner's Instructions Manual

KS1_01818B_01_ENG_UMG
ENG
12/10/02 12:27 PM Page 22

Selecting the Sound Mode

The "S.MODE I-II" button displays/controls the processing and
output of the audio signal. When power is switched ON, the mode
is automatically preset to either "Dual-I" or "STEREO", depending
on the current transmission.
➣

Switching the Sound Off Temporarily

You can switch the sound off temporarily, for example you may
wish to answer the telephone.
22
(depending on the model)
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
N If the receiving conditions deteriorate, listening will be
easier if the mode is set to the "MONO" position using
the S.MODE I-II button.
N If the stereo signal is weak (or if intermittent Stereo-Mono)
and automatic switching occurs, then switch to the
"MONO" mode.
N When receiving mono sound in the AV mode, connect to
the "L" input jack on the panels. If the mono sound
comes out only from the left speaker, then press the
S.MODE I-II button.
1
Press the MUTE button.
Result: The sound is switched off and "
2
When you wish to turn the sound back on at the same volume as
before, press the MUTE
buttons).
On-screen indication
MONO (Normal use)
↔
MONO MONO
NICAM (Normal)
↔
STEREO MONO
NICAM (Normal)
¡ ¡
Dual-I Dual-II MONO
NICAM NICAM (Normal)
MONO (Normal use)
↔
Dual-I Dual-II
↔
STEREO MONO
(Forced Mono)
" is displayed.
button again (or either of the volume