Selecting The Sound Mode - Samsung WS-28M064N Owner's Instructions Manual

Selecting the Sound Mode

The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "Dual-I " or "Stereo", depending on
the current transmission.
➣
N If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
N If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
N When receiving a mono sound in the AV mode, connect
to the "AUDIO-L" input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
(depending on the model)
↔
↔
I ¡
I/II
I ↔
I/II
↔
II ¡
II